Cleaning agent C1001A TDS

[Product introduction] It has an excellent cleaning effect on the surface of the workpiece, such as dirt, water marks, watermarks, residual glue, etc.

[Chemical type] Surfactant and other additives

[Use] This product is suitable for immersion, ultrasonic and other cleaning methods. It is often used for cleaning various workpieces in production.

[Basic performance]

1 Environmentally friendly cleaning agent, no obvious irritation and strong corrosiveness, safe to use.

2. The aqueous solution is alkaline and the cleaning liquid system is stable.

3. It has excellent emulsification, wetting and penetration effects, and has excellent cleaning effects.

4. It can quickly decompose, emulsify, and roll off surface dirt at room temperature.

【Recommendations】

1. This product must be used within the specified temperature range, and generally should not be used above or below the recommended temperature.

2. When using this product, it is not necessary to add other cleaning agents or additives, and it can be used after being diluted.

3. The recommended dosage is 2-4%, too high concentration is difficult to rinse and may cause corrosion to part of the workpiece surface.

4. Attention should be paid to ventilation at the work site, and certain protective measures should be taken during operation.

5. The cleaning effect is better under ultrasonic and spray conditions.

【Packaging, Storage and Transportation】

1. Packing specification: 20L plastic drum

2. Storage and transportation: This product is non-toxic and non-flammable, and is transported as general chemicals. Store in a dry, ventilated place.

The shelf life is 24 months.